Pliers

Chain Nose

Chain nose pliers are commonly used in electronic assembly and rework. They are also used in fine jewelry and beading work. Tronex chain nose pliers feature a very fine tip (.060" x .050"), "eased" inner edges, and extended gripping power. Tronex chain nose pliers can have either flat-faced inner jaws or serrated inner jaws.

"Eased" Inner Jaw Edges Fine Tip

Handle Length These pliers are available in two different handle lengths: Standard handle length 511 Smooth-faced inner jaws 512 Serrated inner jaws Ergonomic handle length 711 Smooth-faced inner jaws 712 Serrated inner jaws

Chain Nose Short Jaw

Chain nose pliers with a short jaw are used in jewelry making, particularly in wire work. The short jaw provides increased stiffness at the tips of the pliers. It also allows added control. All four inner edges of the jaw are “eased” to decrease the risk of workpiece nicking from the edge of the pliers jaw. These pliers have smooth face inner jaws.

"Eased" Inner Jaw Edges Fine Tip

Handle Length These pliers are available in two different handle lengths: Standard handle length 513 Smooth-faced inner jaws Ergonomic handle length 713 Smooth-faced inner jaws

Needle Nose

The Tronex needle nose plier is the same as the Tronex chain nose plier except that the jaws are machined in thin half cones. This thin profile increases tool access. The cone shape can be used for precision loop forming of leads or wire.

Tronex needle nose pliers feature very fine tips. Each of the two tips is .030" x .030". Also the four inner edges of the jaw are "eased" to protect leads or wire during forming. Tronex needle nose pliers have flat-faced inner jaws.

"Eased" Inner Jaw Edges Fine Tip

Handle Length These pliers are available in two different handle lengths: Standard handle length 521 Ergonomic handle length 721

Round Nose

The Tronex round nose plier has a jaw formed by two long, perfectly machined cones. A round nose plier is generally used both to clamp and to form loops on leads or wire.

The Tronex round nose plier features very fine tips. Each of the two tips is .030" in diameter. The very long jaw of the Tronex round nose plier, 1.3", allows for an increased range of loop diameters, from .030" to .250" to be formed. The long jaw also can provide increased access.

"Eased" Inner Jaw Edges Fine Tip

Handle Length These pliers are available in two different handle lengths: Standard handle length 531 Ergonomic handle length 731

Round Nose Short Jaw

The Tronex round nose pliers with a short jaw are used in jewelry making, primarily for making loops. The short jaw provides increased stiffness at the tips to resist deformation when working with heavier gauge wire.

Rounded Inner Jaw Fine Tip

Handle Length These pliers are available in two different handle lengths: Standard handle length 532 Ergonomic handle length 732

Flat Nose

The Tronex flat nose plier is commonly used in electronics assembly and rework. It is also used in fine jewelry and beading work.

The Tronex flat nose plier features a very fine tip, smooth jaws and "eased" inner edges.

"Eased" Edges Fine Tip

Handle Length These pliers are available in two different handle lengths: Standard handle length 541 Ergonomic handle length 741

Bent Nose

The Tronex bent nose pliers are used in jewelry making.

Handle Length These pliers are available in two different handle lengths: Standard handle length 551 Ergonomic handle length 751

Previous page  |  Print page