|
Connector Coating |
 |
A high performance replacement for standard electrical tape and shrink wrap.
Seals, insulates and protects exposed wires, metal, and plastic. Forms a strong,
pliable moisture resistant bond. Will not crack. Great for hard to get at areas.
Tack free in minutes. Resists detergents, acids, alkalis, and sunlight. Product
remains flexible from -34C° to 93°C (-30F° to 200°F).
Directions
Brush it on to almost any surface, or if applying to a component or tool,
simply dip it into the coating and allow to dry. Additional coats may be applied
after 20 minutes.
Specifications
| Uncured Properties |
| Chemical type |
Naptha, rubber solvent |
| Appearance |
Heavy liquid |
| Odor |
Moderate |
| Viscosity |
Flow similar to SAE 60 Motor oil |
| Cured Properties |
Test Method |
Typical Value |
| Tensile Strength |
ASTM D 882 |
2600 psi |
| Dielectric Strength |
ASTM D 149 |
300 v/mil |
| Hardness |
ASTM D2240 |
65 to 75
Shore A |
| Elongation |
ASTM D 638 |
400 to 500% |
| Part Number |
Mfr. Part # |
Sizes Available |
Description |
| MG-4229-55ML |
4229-55ML |
55ml (2 oz) |
Liquid |
| MG-4229-1L |
4229-1L |
1 liter (35 oz) |
Liquid |
| MG-4229-4L |
4229-4L |
4 liter (1 gallon) |
Liquid |
|
|
|
