Silver Conductive Epoxy

Quick Search

Forms high strength conductive bonds

This two part silver epoxy offers high electrical conductivity and strong conductive bonding. Use in place of traditional soldering on heat sensitive components. Good for repairing defective traces and creating jumpers on boards. Can be used as an effective heat sink adhesive. This Conductive Silver Epoxy comes in two 7g syringes.

Frequently Asked Questions on this product

Q. Can I solder to Silver Conductive Epoxy?
A. No, Silver Conductive Epoxy has the temperature contraints of an epoxy and cannot be soldered to. Soldering to this product will cause it to melt.

Q. My 8331 product has a small discoloration. Is this a problem?
A. The discoloration is not a problem and will not affect the adhesive nor the conductive properties.

Specifications

Specification	Test Method	Result
Minimum operating temp.		-30 °C (-22 °F )
Maximum operating temp.		90 °C (194 °F )
Cure time @ 24°C (75°F)		4 hours
Cure time @ 65°C (150°F)		10 minutes
Working time @ 22°C		10 minutes
Volume resistivity @ 25°C	MIK-STD-883E Notice 3, method 5011.4, paragraphs 3.5.8, 3.8.11.1 (Covered Under A2LA Accreditation)	0.38 ohm · cm
Tensile strength	ASTM-D-638-02A	911 psi
Elongation	ASTM-D-638-02A	0.3 %
Compressive Strength	ASTM-D-695-02A	1100 psi
Flexural Strength	ASTM-D-790-03	2,500 psi
Shear Strength	ASTM-D-732-02	234 psi
Cantilever Beam (IZOD) Impact	ASTM-D-256-02 E1	0.39 ft lb ft / in
Thermal Expansion	ASTM-E-831-03	79.3 mm/mm°C