Quick Search

Lead Free Products

XURB Universal Re-balling Unit

The XURB-S set has is an independent heating system, a Hot Plate XURB-H matching the re-balling fixture.

This heating method allows for reflow of re-balled IC in approximately 2 min., which is 2 to 3 times faster and better than on any other heating system.

Specifically designed for XURB, the XURB-H unit has temperature controller with closed loop feedback, which guarantees proper heating rate and maximum temperature limit preventing re-balled component damage.

It also includes cooling fan, like no other unit in the industry to speed-up re-balling time and make better quality solder balls.

Re-balling Set

Re-balling Set allows solder balls to be restored to custom specified BGA or CSP components after residual solder has been removed.

X-BB1s Basic Board Holder Set

Features:

Heavy Base for Stability
Supports boards firmly
Six adjustable heights
Accommodates all board sizes
Spring Assisted up-down motion for operator convenience
Magnetic Base
Min height of the board above the table: 3.6" (93mm)
Max height above the table 5.2" (133mm)
ESD Safe

Smart Tweezers Professional High-Precision R-L-C Meter

Smart Tweezers is an R-L-C meter in a set of tweezers. Smart Tweezers features a unique patented mechanical and electronic design that incorporates a built-in direct precision SMD probe designed for component evaluation on the production line, component impedance testing and sorting of SMD components. Smart Tweezers dramatically cuts the time necessary to troubleshoot and debug a complex PCB making process of locating of a faulty component a breeze.

ST-40 Tip Cleaner

The cleaner itself is made from low-abrasive brass shavings. No water is required to use the tip cleaner, although it cleans the tip better than conventional sponges and reduces the temperature-loss that occurs when using a wetted sponge. The container is made of heat-resistant and slip-proof silicon rubber that is safe for both the soldering iron and the user.

AMT-1.5 Antistatic Masking Tape, 1-1/2"W

Masking tape has an almost limitless number of uses. Unwinds smoothly and removes cleanly and easily, with no slivering. Leaves no residue.

Features:

Antistatic
60 yards per roll.
Width: 1-1/2” (38,1mm).
Thickness: 7 mil (0,18 mm)
Operating temperature: withstands 275 °F (135 °C) up to 45min.
In some cases will replace "Kapton™"

New antistatic (Zero Charge)

Quality ESD Shoes

ATC-1 ESD Transport Cart

Depth 450 mm, width 650 mm, and height 775 mm
Loading capacity of top 50 kg, total loading capacity 150 kg
All wheels are made of ESD-conductive material.
All wheels, Ø 100 mm, with swivel, one with brakes.

ADL-1 ESD Container Dolly

ADL-1 Container Dolly is made of strong, static dissipative and ware resistant high impact material. It is used to transport containers with PCB's, PCB Racks, parts etc. in ESD safe production environment. It is essential in every ESD controlled assembly area.

ASFF-9
Free Standing, One Touch Wrist Strap and Dual Footwear Tester
The wrist strap and independent footwear tester system was created to fill a growing demand for a dependable, low cost and easy-to-use test mechanism for personnel grounding devices. It is available as AWDF-9U/AWFF-9U Tester, (U.S. standards) a 750-kohms to 10-Mohms range for wrist straps and 750kohms to 100Mohms range for footwear and AWDF-9E/AWFF-9E Tester (European standards) a 750-kohms to 35-Mohms range for both wrist straps and footwear

ESD Vacuum Cleaners

Whether your needs are large or small, we have the ESD Vacuum for your application. Testing has proven that ESD Vacuums have a conductive path-to-ground, which whisks away dangerous static electricity that can cause damage to sensitive electronic parts. All vacuums have available HEPA filtration for 99.97% efficiency at .3-micron.

ESD Tweezers with quick-change Dissipative Tips

Industrial Molded Fiber
SDT / Static Dissipative 10E6-10E8 Ohm/sq
Antimagnetic
No contamination

Previous page | Print page