Bomir online Worldwide Distribution Network For SMT, LVA, and ESD Equipment View Shopping Cart USA
Phone: 570 842-4725
Fax: 570 842-4290
Cart: (Empty)

Electrostatic Fieldmeters

177A
STATIC Monitor

177A
  • Multi-point Fieldmeter and Alarm System
  • Detect static buildup before it becomes a problem.
  • Avoid process interruptions, product loss, electrical shocks, fires, and explosions.

The Model 177A is the only intrinsically- safe, multiple-channel fieldmeter system available for long-term, unattended monitoring of static levels at critical points within industrial processes. It cost-effectively monitors up to four locations to determine if static control systems are operating effectively, and it warns when static levels exceed safe operating limits, above which material misbehavior, shocks to personnel, explosions, or fires might occur. Several measurement ranges are available. Tailor sensitivity, range, and alarm thresholds to your needs.

  • Large, easy-to-read LED displays provide instant status of all channels
  • Two alarm threshold levels warn as each threshold is exceeded
  • Analog and digital interfaces accommodate process control and data acquisition requirements
  • Intrinsically safe sensors are approved for use in hazardous locations when used with approved IS barriers
  • Remote sensors can be located up to 1000 feet from the monitor
  • Chopper-stabilized measurement technique is drift free, even in ionized environments

Data Sheet PDF

Manual PDF

Front Panel Program Tree

Modbus Commands PDF

PC Software Download (ME177A Ver. 1.05)

Probes and Accessories

1036E

1036F

Model No.Description
1036E-6 Standard Industrial Sensor
1036F-6 Standard General Purpose Sensor
1036/12 Extension Cable for Model 1036 Sensor
(Optional Lengths Avail.) Consult Factory
96102 Calibration Fixture for Model 1036 Sensors
177ENC Rack Enclosure for Model 177

Probes Data Sheet PDF

257D
PORTABLE Electrostatic Fieldmeter

257D

The Model 257D is a portable, battery-operated fieldmeter for performing static surveys or for use as a diagnostic tool when troubleshooting problems caused by static buildup.

  • Two switch-selectable measurement ranges (2 kV/cm and 20 kV/cm)
  • Recorder output to pass measurements to auxiliary instruments to display or record the data
  • Intrinsically safe sensors are approved for use in hazardous locations when used with approved IS barriers
  • Remote sensors can be located up to 1000 feet from the monitor
  • Chopper-stabilized measurement technique is drift free, even in ionized environments
  • An AC adaptor is provided to recharge the batteries and to operate the Model 257D during longer-term tests

Data Sheet PDF

Manual PDF

Probes and Accessories

1036F

Model No.Description
1036F-5 Standard General Purpose Sensor
257D/110VAC Modular Power Supply
257D/220VAC Modular Power Supply Kit
257D/72 Carry Case

Probes Data Sheet PDF

282A
Digital STAT-ARC 3

282IS

282IS
Digital STAT-ARC 2IS Intrinsically Safe
Fieldmeter for Hazardous Locations

Model 282A Digital Stat-Arc 3 and Model 282IS Digital Stat-Arc 2IS are full-featured hand-held fieldmeters used to perform static surveys and evaluate charge accumulation in electronic manufacturing and in industrial operations such as converting, printing, packaging, and plastics processing.

  • Easy-to-read digital display of field strength provides quantitative data with 100V resolution
  • LED pulsed beam range finder identifies calibrated distance from the surface
  • Chopper-stabilized measurement technique works in the presence of ionization
  • Recorder output to pass measurements to auxiliary instruments to display or record the data
  • Optional Charge Plate System for testing ionization systems
  • Model 282IS is UL approved for use in hazardous environments

Data Sheet

282A Manual

282IS Manual

282L
2000 Volt Range Digital Stat-Arc

The 2000V Range Digital Stat-Arc, Model 282L is a pocket-sized, non-contacting static meter designed for sensitive, low-voltage measurements which produces consistently accurate readings, and is easy to use.

Data Sheet PDF

282M
20kV/cm Range Digital Stat-Arc

The 20kV/cm Digital Stat-Arc, Model 282M is a pocket-sized, non-contacting static meter which produces consistently accurate readings, and is easy to use.

Data Sheet PDF

282H
200kV Range Digital Stat-Arc

The 200kV F.S. Digital Stat-Arc , Model 282H is a pocket-sized, non-contacting static meter which produces consistently accurate readings, and is easy to use.

Data Sheet PDF

281
STATIC Locator

281

279L

Model 281 is ideal for those looking for the most important features in a fieldmeter at a very reasonable price.

  • Easy-to-read digital display of field strength provides quantitative data with 100V resolution
  • HOLD button to retain measurements made in hard-to-read locations
  • Battery SavRâ„¢ turns the fieldmeter off when not in use
  • RoHS Compliant

Data Sheet PDF

Manual PDF

289
STATIC Locator

289

The Model 289 is ideal for those who need to make qualitative static surveys at the most affordable price. It features a high-speed LED bar graph that quickly shows the magnitude and polarity of the static charge. A simple-to-operate zero button and conductive case (for obtaining a ground connection) help to make this one of the easiest instruments you will ever operate.

Data Sheet PDF

  |  Print page